4040XP Tandem Door Closer - Extra Heavy Duty
4040XP Tandem Door Closer - Extra Heavy Duty
The correct choice of door control involves many factors, not least the ‘sail area’ - i.e. a combination of the door’s height x width. In general terms all Relcross heavy duty overhead door closers are capable of controlling conventional doors up to 136 kilos in weight although all doors must be free swinging with the correct choice of hinges and pivots being a critical prerequisite.
Where doors exceed the 136 kilo limit, a proven custom (Relcross) solution exists. Developed over many years the 4040XP.TANDEM Overhead Door Closer (shows single cylinder layout) comprises two heavy duty cylinders - linked to produce considerable power without any loss of control - to suit doors to 272 kilos. An additional cylinder can be introduced for extra heavy doors in excess of 272 kilos - consult the sales office for further information.
- Hinge (Pull Side) Mounting
- Top Jamb (Push Side) Mounting
- Stop Face (Push Side) Mounting
Features and Benefits
- 44% increased bearing load capacity
- Strongest pinion ever- at 19mm journal diameter
- Widest bearing ever- at 16mm
- Stronger pinion teeth
- New V-shield™ seal with 20% longer life
- XP = eXtra Protection in real world applications
- Cast Iron
- Forged Steel Arm
- Double Heat Treated Steel Pinion
- All Weather Fluid
- Non-Handed
- LCN® Fast™ Power Adjust
- Fast & Accurate Installation
Specifications
- 4040XP.TANDEM closer (shows single cylinder layout) shipped with EDA arm, metal covers and self reaming & tapping screws
- 2 off non-sized cylinders (4041) for interior doors to1524mm and exterior (perimeter) doors to 1220mm
- Closer can mount hinge side, top jamb, or parallel arm (with EDA shoe) and is handed for right or left swinging doors
- Standard or optional custom powder coat finish
- Optional plated finish on metal cover, arm and fasteners
- Optional SRI primer for installations in corrosive conditions is available with powder coat only
- 4040XP.TANDEM can be used with all 4040 accessories shown below
- Surface Mounting
For interior or exterior doors. Single acting cylinder ( x 2) on door top rail withexposed regular arm to head frame (hinge pull side). Single acting cylinder ( x 2) onhead frame with exposed regular arm to door top rail (top jamb push side).Single acting cylinder ( x 2) on door top rail with exposed regular arm to head frame(stop face push side) - Maximum Opening
Butt hinge template allows 120° with hold open points between 90° and 120°with the optional hold open arm (hinge pull side & top jamb push side). 180°opening and hold open points with all except CUSH-N-STOP arms (stop facepush side). 110° opening and optional hold open with CUSH-N-STOP arms - Consult Relcross for all pivot mounted installations
- Butt Hinges should not exceed 127mm in width
- Auxiliary Stop is recommended - Except CUSH options
- Reveals to both to both hinge pull side and top jamb push side must be advised
- Stop Width minimum 25mm or 38mm with CUSH-N-STOP arm(stop face push side)
- Head Frame minimum 100mm. Flush head frame requires 4040-419 flush panel adaptor (stop face push side)
- Top Rail dimensional requirments - consult Relcross
- Clearance minimum 60mm behind the door for 90° installation (hinge pull side)
- Delayed Action - not available
- Bull Nose Trim requires 4040-65 soffit shoe (hinge pull side)
- Standard Finish - US28 powder coated silver
Mounting Options & Arms
Extra Duty Regular Arm - 4510-3077
Non-handed arm mounts pull side or top jamb with shallow reveal
Long Arm - 4510-3077L
Optional non-handed arm includes long forearm and shoe (for deep reveal)
Extra Long Arm - 4510-3077ELR
Optional non-handed arm includes extra long forearm and shoe (for extra deep reveal)
Hold-Open Arm - 4510-3049
Optional, non-handed arm mounts pull side or top jamb (flush), hold-open adjustable shoe
Long Hold-Open Arm - 4510-3049L
Optional non-handed arm mounts pull side or top jamb (w. deep reveal), hold-open adjustable shoe
Extra Duty Arm - 4040XP-3077EDA
Non-handed parallel arm features forged, solid steel main and forearm
Hold-Open Extra Duty Arm - 4040XP-3049EDA
Optional handed arm provides hold-open function, adjustable at the shoe
Cush-N-Stop® Arm - 4040XP-3077CNS
Optional, non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe
HCUSH Arm - 4040XP-3049CNS
Provides hold-open function with templated stop/hold-open points. Handle controls hold-open function
Spring CUSH Arm - 4040XP-3077SCNS
Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe
Spring HCUSH Arm - 4040XP-3049SCNS
Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function
Cylinder - 4040XP-3071 ( x 2)
Heavy duty, non-handed cast iron cylinder assembly
Covers - 4040XP-72MC ( x 2)
Standard, handed metal cover
Plate - 4040XP-18.TANDEM
Required for all installations
CUSH Shoe Support - 4040XP-30
Provides anchorage for fifth screw used with CUSH arms, where reveal is less than 78 mm
Blade Stop Spacer - 4040XP-61
Required to lower parallel arm shoe to clear 13 mm blade stop
CUSH Flush Panel Adapter - 4040XP-419
Provides horizontal mounting surface for CUSH shoe on single rebated or flush frame
How to Specify or Order
4040XP.TANDEM Heavy Duty Door Closer (Handed) Fig. 1
4040XP.TANDEM Heavy Duty Door Closer (Handed) Fig. 61
4040XP.TANDEM Heavy Duty Door Closer (Handed) Fig. 6
Finishes
US28 - Powder Coated Silver