HG305 Continuous Hinge Guard - Stainless Steel

The integral hinge guard protects the door from dings and gouges from carts and gurneys while providing clean lines and an aesthetic appearance. The wrap-around edge guard protects the door from unsightly dents and prevents further damage.

The HG305 hinge is suitable for use on doorsets that have achieved 60 or 30 minutes integrity when tested by a UKAS approved laboratory to EN 1634-1:2000. Alternatively the doorset should meet the requirements of a FD60 or FD30 doorset as defined in Approved Document B to the Building Regulations.

This hinge is self lubricating and requires no lubrication on installation or during its life cycle. We recommend that hinges are inspected regularly to check fastenings are secure and have no unusual wear characteristics. This should be done at least bi annually however this may need to be increased depending on the application.

UK Fire Certification in accordance with BS 476 part 22 (timber)
WFRC No. 149248 & 149249 - 60mins

Standard Features

• Barrel Type Hinge - 4.75mm diameter stainless steel pin (rod)
• Flanged nylon bearings
• Stainless steel end pins
• Material - Heavy-duty 14 gauge stainless steel
• Standards - Grade 1 ANSI/BHMA Standard A156.26
• Mounting Hardware - Fasteners concealed when door is closed
• Universal screw pack provided
• Capacity - Supports weights up to 272 kilos
• 1220mm maximum door width
• Standard Sizes - Nominal Only - 7ft (actual 83.1/8" or 2111mm), 8ft (actual 95" or 2413mm) & 10ft (actual 118.75" or 3016mm)
  Cutting Hinges - Technical Memo
• Hole Pattern - Symmetrically templated
• Handing - Not required for standard sizes listed above

Optional Features

• Custom lengths- specify in inches
• Custom hole pattern
• Dutch door hinges- suffix “DDP”
• Hospital tips – suffix “HT”
• Raised barrel – suffix "RB"
• Special sheared leaf
• Fasteners Adjust-A-Screw™ for correcting frame fit problems up to 9.5mm

Electrical Modifications

• Adjustable monitoring switch - suffix “AMS”
• Current Transfer Prep - suffix “CTP”
• Electrical Transfer Access Prep - suffix "ETAP"
• ElectroLynx™ EL4 (4 wire), EL8 (8 wire), EL12 (12 wire)

How to Specify or Order

HG305 - Full Mortice Continuous Hinge Guard (@ 2111mm)* (designed for doors to 44mm thick)

* nominate an alternative length if necessary. Hinges can be cut on site to suit door height.

Finishes

US32D - Satin Stainless Steel
US32 - Bright Stainless Steel
Scratch-Resistant Powder Coated Paint