4210 Series Door Closer - Stop Face (Push Side) Mounting
4210 Series Door Closer - Stop Face (Push Side) Mounting
Specifications
- Standard 4210 series closer shipped with EXTRA DUTY arm, metal security cover and hex-pin security screw pack
- Non-sized cylinders (4211) adjustable for interior doors to 1372mm and exterior (perimeter) doors to 1067mm
- Sized cylinders (4216) for interior doors to 1524mm and exterior (perimeter) doors 1220mm
- Handed for clockwise (left hand) and anti-clockwise (right hand) closing doors
- Standard or optional custom powder coated finish – Optional plated finish on arm, cover and fasteners
- Butt hinges should not exceed 127mm in width
- Auxilliary stop is recommended where the door cannot swing 180°or where CUSH arms are not used
- Clearance for EDA or CUSH is 140mm from push side of door
- Top rail less than 130mm measured from stop, requires PLATE 4210-18. Plate requires 51mm minimum top rail
- Stop width - 70mm recommended. Less than 25mm, consult Relcross
- Delay Action - Add suffix “DEL” to selected cylinder (eg. 4213DEL). Not available with 4215 or 4216 cylinder. Delays closing from maximum opening to approximately 70°. Delays time adjustable up to approximately 1 minute
- Advanced Variable Backcheck cylinder (AVB) starts backcheck at approximately 45° instead of the normal 75°. Add suffix “AVB” to selected cylinder (eg. 4213 AVB). When combined with Delayed Action, consult Relcross for special template
Mounting Options & Arms
Extra Duty Arm - 4210-3077EDA
Non-handed parallel arm features solid forged steel main arm and forearm for potentially abusive installations. Double slab arm/pinion attachment for maximum strength
CUSH-N-Stop® (CUSH) Arm - 4210-3077CNS
Optional, handed parallel arm features solid forged steel main arm and forearm with built-in stop in soffit shoe. Double slab arm/pinion attachment for maximum strength
HCUSH Arm - 4210-3049CNS
Optional handed arm provides hold-open function with templated stop/hold-open points. Handle controls hold-open function. HCUSH arm not available with 4216 cylinder. Double slab arm/pinion attachment for maximum strength
Cylinder - 4210-3071
Standard, handed cast iron cylinder assembly
Security Cover - 4210-72MC
Standard, handed heavy gauge metal security cover. Four point mounting for extra security. Closer adjustments not accessible with cover installed
Plate - 4210-18 - 4210-18CUSH
Required for push side mount where top rail is less than 130 mm, measured from the stop. Plate requires 51 mm minimum top rail measured from the stop. Plate also used with CUSH arm installations
CUSH Shoe Support - 4210-30
Provide anchorage for fifth screw used with CUSH arms where reveal is less than 78 mm
Blade Stop Spacer - 4210-61
Lowers parallel arm shoe to clear 13 mm blade stop
CUSH Flush Panel Adapter - 4210-419
Provides horizontal mounting surface for CUSH shoe on single rabetted or flush frame
How to Specify or Order
4211 Heavy Duty Door Closer (Handed)
4216 Heavy Duty Door Closer (Handed)
Finishes
US28 - Powder Coated Silver