4110 Series Door Closer - Stop Face (Push Side) Mounting
4110 Series Door Closer - Stop Face (Push Side) Mounting
Features and Benefits
- Ten Million Cycles
- Cast Iron
- Extra Duty Forged Steel Arm Standard
- Double Heat Treated Steel Pinion
- All Weather Fluid
- LCN® Fast™ Power Adjust
- Fast & Accurate Installation
UK Fire Certification in accordance with BS EN 1634-1:2014 (timber) - 120 mins
UK Fire Certification in accordance with BS EN 1634-1:2014 (steel) - 60 mins
WFRC No. 142058 - Issue 4. Valid Until 1st December 2019
EN 1154: 1996: A1: 2002/AC:2006
CE Certified. Certification applies to Stop Face (Push Side) Mounting Only (4111)CE Certified. Certification applies to Stop Face (Push Side) Mounting Only (4116)
Specifications
- Sized cylinders 4116 for interior doors to 1524mm and exterior (perimeter) doors to 1220mm
- Non-sized cylinders 4111 for interior doors to 1372mm and exterior (perimeter) doors to 1067mm
- Closer mounts parallel arm
- Standard or optional custom powder coat finish
- Standard 4110 series closer is shipped with extra duty arm, standard plastic cover, 4110-201 fifth screw spacer and self reaming and tapping screws
- Optional plated finish on metal cover, arm and fasteners
- Optional SRI primer for installations in corrosive conditions is available with powder coat only
- Handed for clockwise (left hand) and anti-clockwise (right hand) closing doors
- Surface Mounting
For interior or exterior doors. Single acting cylinder on door top rail - Exposed regular arm to head frame
- Maximum Opening
Butt hinge template allows 180° with EDA arm and optional hold open arm - Optional CUSH-N-STOP & H-CUSH-N-STOP arms allow up to 110°
- Consult Relcross for all pivot mounted installations
- Butt Hinges should not exceed 127mm in width
- Auxiliary Stop is recommended - Except CUSH options. Reveal less than 70mm, use 4110-30 CUSH SHOE SUPPORT
- Stop Width minimum 25mm
- Top Rail minimum 130mm from the underside of the stop (51mm with 4110-18 plate)
- Delayed Action add suffix DEL to the selected closer. Not available on 4116. Delays closing from maximum opening down to 70° - adjustable up to 60 seconds. NB - Delay Action falls outside the scope of the CE certification - please contact Relcross Ltd for assistance.
- Standard Finish - US28 powder coated silver
Mounting Options & Arms
Extra Duty Arm - 4110-3077EDA - 4110-62G - 4110-145
Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. Optional 4110-62G thick hub shoe for blade stop clearance. Optional 4110-145 flush transom shoe for single rebated installations. Optional shoes require special templating
Hold-Open Arm - 4110-3049EDA
Optional handed arm provides hold-open function, adjustable at shoe
Cush-N-Stop Arm - 4110-3077CNS
Optional, handed parallel arm features solid forged steel main arm and forearm with built-in stop in soffit shoe
H-Cush Arm - 4110-3049CNS
Optional handed arm provides hold-open function with templated stop/hold-open points. Handle controls hold-open function
Spring Cush Arm - 4110-3077SCNS
Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe
Spring H-Cush Arm - 4110-3049SCNS
Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function
Standard, handed cast iron cylinder assembly
Cover - 4110-72
Standard, non-handed plastic cover
Lead Lined Cover - 4110-72LL
Optional, non-handed plastic cover
Metal Cover - 4110-72MC
Optional, handed cover. Required for plated finishes and custom powder coat finishes
Plate - 4110-18, 4110-18CUSH
Required for push side mount where top rail is less than 130 mm, measured from the stop. Plate requires 51mm minimum top rail. Plate also used with CUSH Arm installations
Cush Shoe Support - 4110-30
Provides anchorage for fifth screw used with CUSH arm where reveal is less than 78 mm
Blade Stop Spacer - 4110-61
Lowers parallel arm shoe to clear 13 mm blade stop
PA Shoe Adapter - 4110-418
Provides horizontal mounting surface for parallel arm shoe on single rebated or flush frame
Cush Flush Panel Adapter - 4110-419
Provides horizontal mounting surface for CUSH shoe on single rebated or flush frame
How to Specify or Order
4111 Heavy Duty Door Closer (Handed)
4116 Heavy Duty Door Closer (Handed)
Finishes
US28 - Powder Coated Silver
