2030 Series Door Closer - Concealed (in Frame) Mounting
2030 Series Door Closer - Concealed (in Frame) Mounting
WFRC No. 142058 - Issue 4. Valid Until 1st December 2019
EN 1154: 1996: A1: 2002/AC:2006
CE Certified. Certification applies to Concealed (in Frame) Mounting Only (2035)Specifications
- Standard 2030 series closer shipped with single lever (standard) arm, mounting/finish plate, standard track, track roller and wood & machine screw pack
- Sized cylinders for interior doors to 1372mm and exterior (perimeter) doors to 1067mm
- Handed for clockwise (left hand) and anti-clockwise (right hand) closing doors
- Head frame requires minimum 45mm x 102mm ‘tube’
- Standard or optional custom powder coat finish
- Optional plated finish on arm, fasteners and finish plate
- Concealed Mounting
For interior or exterior doors. Single acting cylinder in head frame. - Concealed arm and track in door top rail
- Maximum Opening
Butt hinge template allows 180° (trim permitting), limited to 110° when the optional bumper is installed. Hold open points are available between 85° and 110° with the optional HO Clip - Consult Relcross for all pivot mounted installations
- Butt Hinges should not exceed 127mm in width
- Auxiliary Stop is recommended - The optional track bumper assists the back-check function in cushioning the opening swing of the door. It is not intended to replace an auxiliary stop
- Top Rail 35mm mortice required with an 8mm cut-out required at the top of the door (stop face only)
- Door Thickness minimum 45mm
- Hollow Metal Frames consult Relcross for installation instructions
- Timber Frame Installation is simplified by the timber mounting clip set 2030-416 & 2030-417 for centre pivot and offset pivot/butt hung installations respectively. Consult Relcross for door preparation details
Mounting Options & Arms
*CE certified (applies to size 5 only)
Standard Arm - 2030-3077T
Handed arm. Track roller not included with arm
Cylinder - 2030-3071
Standard, handed, cast iron cylinder assembly with mounting plate
Standard Track - 2030-3038
Standard, non hold-open, non-handed track. Will accept hold-open clip and/or bumper assembly.
Standard Track with Bumper - 2030-3038B
Optional, non hold-open, non-handed track with bumper. Will accept hold-open clip.
Hold-Open Track - 2030-3038H
Optional, non-handed hold-open track. Will accept bumper assembly.
Hold-Open Track with Bumper - 2030-3038HB
Optional, non-handed hold-open track with bumper
Wood Mounting Clip Set - 2030-416
Simplifies mounting center pivoted 2030 closer in wood frame. Includes latch stile clip, hinge stile clip, and cover. For use with 7000 Series centre pivots. Consult Relcross for special template
Wood Mounting Clip Set - 2030-417
Simplifies mounting offset pivoted or butt hung 2030 closer in wood frame. Includes two clips. For use with offset pivots
Track Bumper - 2030-169
Mounts in track to assist backcheck. Limits maximum opening. Consists of bumper, bumper post, and mounting screw. Note: Track bumper does not replace auxiliary stop
Hold-Open Clip - 2030-3054
Mounts in track to provide hold-open function. Hold-open point controlled by clip location.
Track Roller - 2030-3034
Quiet, low friction roller assembly. Shoulder dimension "X" = 2mm
How to Specify or Order
2032 Concealed Door Closer (Handed)
2033 Concealed Door Closer (Handed)
2034 Concealed Door Closer (Handed)
2035 Concealed Door Closer (Handed)
Finishes
US28 - Powder Coated Silver