2010 Series Door Closer - Concealed (in Frame) Mounting

The concealed 2010 Series is a heavy duty closer designed to provide complete concealment. The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements.

UK Fire Certification in accordance with BS EN 1634-1:2014 (timber) - 60 mins
WFRC No. 142058 - Issue 4. Valid Until 1st December 2019

EN 1154: 1996 + A1: 2002/AC:2006

CE Certified. Certification applies to Concealed (in Frame) Mounting Only (2015)
CE Certified. Certification applies to Concealed (in Frame) Mounting Only (2016)

Specifications

• Standard 2010 series closer shipped with single lever (standard) arm, mounting/finish plate, standard track, track roller and wood & machine screw pack
• Sized cylinders for interior doors to 1524mm and exterior (perimeter) doors to 1220mm
• Handed for clockwise (left hand) and anti-clockwise (right hand) closing doors
• For aluminum, hollow metal, or wood, doors and frames
• Head frame requires minimum 102mm x 102mm ‘tube’
• Standard or optional custom powder coated finish - Optional plated finish on arm, fasteners, and mounting/finish plate
• Optional SRI primer for installations in corrosive conditions
• Concealed Mounting
  For interior or exterior doors. Single acting cylinder in head frame. Concealed arm and track in door top rail
• Maximum Opening
  Butt hinge template allows 180° (trim permitting), limited to 110° when the optional bumper is installed. Hold open points are available between 85° and 110° with the optional HO Clip
• Consult Relcross for all pivot mounted installations
• Butt Hinges should not exceed 127mm in width
• Auxiliary Stop is recommended - The optional track bumper assists the back-check function in cushioning the opening swing of the door. It is not intended to replace an auxiliary stop
• Top Rail 35mm mortice required with an 8mm cut-out required at the top of the door (stop face only)
• Door Thickness minimum 45mm
• Hollow Metal Frames consult Relcross for installation instructions

Mounting Options & Arms

*CE certified (applies to sizes 5 and 6 only)

Standard Arm - 2010-3077T
Handed arm. Track roller not included with arm

Cylinder - 2010-3071
Standard, handed, cast iron cylinder assembly with mounting plate

Standard Track - 2010-3038
Standard, non hold-open, non-handed track. Will accept hold-open clip and/or bumper assembly

Standard Track with Bumper - 2010-3038B
Optional, non hold-open, non-handed track with bumper. Will accept hold-open clip

Hold-Open Track - 2010-3038H
Optional, non-handed hold-open track. Will accept bumper assembly

Hold-Open Track with Bumper - 2010-3038HB
Optional, non-handed hold-open track with bumper

Track Bumper - 2010-169
Mounts in track to assist backcheck. Limits maximum opening. Consists of bumper, bumper post, and mounting screw. Note: Track bumper does not replace auxiliary stop.

Hold-Open Clip - 2010-3054
Mounts in track to provide hold-open function. Hold-open point controlled by clip location

Track Roller - 2010-3034
Quiet, low friction roller assembly. Shoulder dimension "X" = 2mm.

How to Specify or Order

2013 Concealed Door Closer (Handed)
2014 Concealed Door Closer (Handed)
2015 Concealed Door Closer (Handed)
2016 Concealed Door Closer (Handed)

Finishes

US28 - Powder Coated Silver