2227 Surface Mounted Vertical Rod Device
2227 Surface Mounted Vertical Rod Device
Characteristics
Specifically designed for use in areas where frequent abusive treatment can be expected. The 22 Series is constructed from heavy gauge rolled steel section with the proven heavy duty touch bar mechanism that has been used so successfully in all architectural grade Von Duprin touch bar devices.
UK Fire Certification in accordance with EN 1634-1:2000 (timber)
WFRC No. C132276 120mins BS EN 1125:1997
EN 1125: 2008
Features & Benefits
- Device Functions - Ships ready for all functions; EO, DT, NL, TP, & L
- Universal - Non-handed, suits LH & RH doors
- Device Lengths - Standard device suits doors to 915mm, optional device suits doors to 1220mm
- Door Height - Standard door height accommodated - 2134mm, extension rods are available for doors to 3048mm. Extension Rod Lengths - 305mm & 915mm
- Finishes - SP28 (689) Sprayed Silver, SP313 (695) Sprayed Dark Bronze
- Strikes - Ships with standard 299 roller strike, bottom strikes 248L-4 and 304L. Optional strikes are available to suit alternative frame details (consult the Relcross for details)
- Dogging Feature - Hex Key Dogging keeps the latch bolt held back for free swinging operation, LD Less Dogging is available to special order
- Electric Options -
LX Latchbolt Monitor Switch
RX Touch Bar Monitor Switch
RX2 Double Touch Bar Monitor Switch (RX2 feature uses two RX switches)
ALK Alarm Exit Kit - Fasteners - Includes fixings for both metal and timber doors 19mm < 57mm thick with sex bolts available to special order - 425 for bolt through fixings
- Latch Bolt - Deadlocking anti-friction top & bottom bolts with 16mm throw
Recommendations for Installing & Fixing
In accordance with BS EN 1125:1997 Annexe A (informative) the device should be installed with the touch bar normally at a height between 900mm and 1100mm from the finished floor level when the door is in the secure position. Where it is known that the majority of the occupants of the premises will be young children, it is acceptable to reduce the fixing height accordingly.
Strikes for 2227 Surface Mounted Vertical Rod Devices
299 Top Roller Strike with 21mm projection, used with conventional frames where a reveal >32mm exists.
248L-4 Bottom Strike for use with flat top thresholds. Since the strike projects by 10mm care should be taken to ensure installation does not pose a trip hazard.
304L Optional Bottom Strike for use where a mortice installation is desired.
Please note - Both the 248L-4 & 304L Bottom Strikes are supplied as standard with all surface mounted vertical rod devices.
Optional Trim (for Outside Access)
Please refer to the 2227 Data Sheet (part 2) on the next tab.
How to Specify or Order
2227 Surface Mounted Vertical Rod Device for Doors <915mm
2227 Surface Mounted Vertical Rod Device for Doors <1220mm
add suffix -
EO - Exit Only
DT - Dummy Trim
NL - Night Latch Trim
TP - Thumb Piece Trim
L - Lever Trim
Finishes
SP28 - Sprayed Silver
SP313 - Sprayed Bronze