1460T/1461T Series Door Closer - Standard Duty Universal Mounting
1460T/1461T Series Door Closer - Standard Duty Universal Mounting
- Hinge (Pull Side) Mounting
- Top Jamb (Pull Side) Mounting
- Stop Face (Push Side) Mounting
Features and Benefits
-
Non-handed for right and left swinging doors
-
Adjustable hydraulic backcheck cushions opening swing prior to 90 degrees
-
Separate regulation of general closing speed and latching speed
UK Fire Certification in accordance with BS EN 1634-1:2014 (timber) - 120 mins
WFRC No. 142058 - Issue 4. Valid Until 1st December 2019
EN 1154: 1996 + A1: 2002/AC:2006
CE Certified. Certification applies to Hinge (Pull Side) Mounting OnlySpecifications
- Standard 1460T series closer shipped with standard arm, standard track, track roller, plastic cover and wood & machine screw pack
- Multiple cover options include; Standard (Slim line), Full and Designer Series
- Non-sized cylinders (1461) for interior doors to 1220mm
- Closer mounts pull side on door, pull side top jamb & push side on door on either right or left swinging doors
- Standard or optional custom powder coat finish. Optional plated finish on Designer Series metal cover, arm and fasteners
- Optional SRI primer for installations in corrosive conditions
- Surface Mounting
This standard duty track closer is designed to suit interior doors to 1220mm where a ‘low profile’ aesthetically pleasing solution is preferred. Single acting cylinder on door top rail with exposed arm and track to head frame (hinge pull side). Single acting cylinder on head frame with exposed arm and track to door top rail (top jamb pull side). Single acting cylinder on door top rail with exposed arm and track to head frame (stop face push side) - Maximum Opening
Butt hinge templating allows up to 180° limited to 115° with the optional bumper, hold open points between 85° and 115° in 5° increments with the optional hold open track (hinge pull side & top jamb pull side). 110° limited to 100° with the optional bumper, hold open points between 85° and 100° in 5° increments with the optional hold open track (stop face push side) - Consult Relcross for all pivot mounted installations.
- Butt Hinges should not exceed 127mm in width
- Auxiliary Stop is recommended
- Reveal should not exceed 3mm (hinge pull side & top jamb pull side)
- Stop Width minimum 32mm (stop face push side)
- Head Frame less than 70mm requires 1460T-18 plate - plate requires 44mm minimum (top jamb pull side)
- Top Rail less than 64mm requires 1460T-18 plate - plate requires 38mm minimum (hinge pull side). Minimum 32mm (top jamb pull side). Less than 102mm from the underside of the stop face requires 1460T-18PA plate - plate requires 38mm minimum (stop face push side)
- Clearance minimum 60mm behind the door for 90° installation (hinge pull side)
- Standard Finish - US28 powder coated silver
Mounting Options & Arms
Standard Track Arm - 1460T-3077T
Non-handed single lever arm mounts hinge side, top jamb, or stop face. Track roller not included with arm
Standard Track - 1460T-3038
Standard, non hold-open, non-handed track mounts on either side of the door. Will accept hold-open clip and/or bumper assembly
Standard Track with Bumper - 1460T-3038B
Optional, non hold-open, non-handed track with bumper mounts on either side of the door. Will accept hold-open clip
Hold-Open Track - 1460T-3038H
Optional, non-handed hold-open track mounts on either side of the door. Will accept bumper assembly
Optional, non-handed hold-open track with bumper mounts on either side of the door
Cover - 1460-72
Standard, non-handed, slim line plastic cover with feature strip
Full Cover - 1460-72FC
Optional, non-handed, plastic cover provides complete enclosure
Designer Series Metal Cover - 1460-72DS1
Optional, non-handed designer series metal full cover provides complete enclosure with a stylish look. Required for plating and custom powder coat option
Cylinder - 1460-3071
Standard, non-handed cast iron cylinder assembly
How to Specify or Order
1460T/1461T Standard Duty Track Arm Door Closer
Finishes
US28 - Powder Coated Silver