KS Series - Key Switch
KS Series - Key Switches
System & Actuator Override
In automated entry systems (automatic doors), where zonal timers are not used, entire systems may be switched via manual operation, i.e. via a key switch. The key switch is supplied usually in ‘Alternate’ mode and controls power to the system’s actuators whether they be microwave motion sensors or wall mounted switches.
Heavy Duty Key Switch
KS-1.M – Momentary Contact
KS-1.A – Alternate Contact
Operation – Key switch with NO & NC contacts
Switch Rating – 5 Amps @ 12Vdc/24Vdc
Cylinder – Round screw-in mortice cylinder
Default – Double gang (only)
Disc Tumbler Key Switch (Boxed)
KS-2 – Momentary Contact
KS-2T – Trapped Key Option
Operation – Key switch with NO & NC contacts
Switch Rating – 3 Amps @ 12Vdc/24Vdc
Cylinder – Disc tumbler
Default – 95mm x 40mm x 32mm
Disc Tumbler Key Switch (on Plate)
KS-3 – Momentary Contact
KS-3T – Trapped Key Option
Operation – Key switch with NO & NC contacts
Switch Rating – 3 Amps @ 12Vdc/24Vdc
Cylinder – Disc tumbler
Default – 100mm x 40mm x 32mm
Heavy Duty Euro Profile Key Switch
EKS-1.M – Momentary Contact
EKS-1.A – Alternate Contact
Operation – Key switch with NO & NC changeover contacts
Switch Rating – 5 Amps @ 12Vdc/24Vdc
Cylinder – Euro Profile Cylinder 38-40mm
with location adjustable cam
Default – Single gang (flush only)
LEDs
A bi-colour LED is included by default on the KS-1 Key Switch only.
This will switch from red to green to indicate the status of the switch.
NB - Key switches are not engraved unless to special order.
Dimensional Data
Please refer to the 'Push Button & Key Operated Switches' Data Sheet on the next tab.
Narrow Style - Single Gang -
How to Specify or Order
KS-1.M – Momentary Contact
KS-1.A – Alternate Contact
KS-2 – Momentary Contact
KS-2T – Trapped Key Option
KS-3 – Momentary Contact
KS-3T – Trapped Key Option
EKS-1.M – Momentary Contact
EKS-1.A – Alternate Contact
Finishes
US32D - Satin Stainless Steel (Faceplates)*
* Some finishes are stainless steel effect (lacquered)