CB1960R Series Hinge
CB1960R Series Hinge
Choosing a Suitable Bearing Surface
A combination of the mass of the door and its frequency of use will determine whether the hinge you choose is from our Heavy Weight or Standard Weight options.
The Heavy Weight and Standard Weight options comprise hinges with anti-friction bearings exclusively. Heavy weight hinges should be used always on heavy doors and doors where high frequency service is expected.
The CB Series - Three knuckle CB series concealed bearing hinges are our top of the range architectural solution. Built around a proven two-piece concealed bearing system that never needs maintenance, the CB bearing provides both lateral and vertical support.
Class Code
CB1960R - Concealed Bearing (Standard Weight) - Grade 13
- CE-EC Certificate of Conformity - 1720-CPD-0020
- Certifire Approved
- Manufacturing Facility
ISO 9001 & ISO 14001 Certified - Limited Warranty -
for the life of the building
- Grade 304 Stainless Steel
Available options -
- HT - Hospital Tip
- NRP - Non-removable Pin
- RD - Radius Corners (16mm standard)
- SEC - Security Stud (15mm standard)
BS EN 1935:2002
Hinge Grade - 13
Number of Test Cycles - 200,000
Test Mass of Hinged Element - 120 kilos
Important Note:
The test mass element of 120 kilos must not be interpreted as the maximum recommended capacity of all hinges passing this test successfully. Similarly, the number of test cycles should not be interpreted as the maximum number of available cycles for doors incorporating this hinge. Under certain circumstances doors may exceed this figure significantly.
Template No. REL.E102 -
Please refer to the CB1960R Series - Templates (Data Sheet 2) on the next tab.
Sizes: 102mm x 76mm, 102mm x 89mm and 102mm x 102mm
Template No. REL.E114 -
Please refer to the CB1960R Series - Templates (Data Sheet 2) on the next tab.
Sizes: 114mm x 102mm only
Supplied Screws: Pozidriv wood screws - No.12 x 32mm (8 per hinge).
Box Quantity: 3 off singles per box (48 off singles per case).
How to Specify or Order
See CB1960R Series - Correct Specification (Data Sheet 1)
Finishes
US3 - Polished Brass Plated Stainless Steel
US32 - Polished Stainless Steel
US32D - Satin Stainless Steel