SSS-4 Series Safety Sensor

Monitored On- Door Pedestrian Safety

The SSS-4 is a robust monitored on-door safety sensor for automatic swing doors. This sensor has been built upon the very reliable platform of the SSS-3 sensor to conform to EN16005 standards.

• Increased Pedestrian Safety - Detection area focused close to the floor and to the leading edge of the door maximises pedestrian safety
• Slim & Round Design - Round sensor body design enhances the look of all swing door installations
• Easy to Install - Expert design and positioning of electronic components ensure speedy and accurate installation is always achieved
• Strong & Robust - Solid, tough sensor body design not susceptible to vandalism or damage during installation

General & Technical Characterisitics

• Model - SSS-4 Monitored On-Door Safety Sensor
• Detection Method - Infrared Presence Detection with P.S.D. distance measurement
• Installation Height - 2600mm (8.5ft) Max
• Sensor Dimensions -
  SSS-4S1: 340mm (W), 45mm (H), 45mm (D), SSS-4M2: 700mm (W), 45mm (H), 45mm (D), SSS-4L2: 900mm (W), 45mm (H), 45mm (D)
• Pattern Adjustment - Beam Angle Adjustment: 5, 10, 15, 20, 25 degrees
• Detection Distance - Adjustment: Dead Zone, 50-500mm
• Detection Range - 0 - 2.5m (0 - 8ft 2 inches)
• Presence - Timer Infinity
• IP Rating - 54
• Power Supply - 12 to 24V AC or DC ± 10%
• Power Consumption - AC12V-1.3 [VA] (Max), DC12V-65 [mA] (All figures for 1 PCB unit) AC24V-1.7 [VA] (Max), DC24V-35 [mA] (All figures for 1 PCB unit)
• Output Relay - Relay contact: DC50V 0.1A Non Voltage 1C
• Response Speed - Less than 100 msec
• Relay Hold Time - 0.5 sec
• DIP Switch Functions - 1: Test Input 2: Optical Interface 3: Relay Hold Time 4: Relay Output Mode
• DIP Switch Control - 5: Detection Range - 6: Dead Zone 7: Dead Zone 8: Reserved - Keep Off
• Operating Temperature - -20°C to +60°C, (-4°F to 140°F)

How to Specify or Order

SSS-4S1 - Closing Face
SSS-4M2 - Opening Face
SSS-4L2 - Opening Face (wide doors)

Finishes

ABS - Black