Keep me updated
Modular Ramp Assemblies - Flush Applications
Product Code: R.5F_, R.75F_, R1F_, R1.25F_, R1.5F_, R1.75F_ & R2F_
Modular Ramp Assemblies - Flush Applications
About Modular Ramps (MR)
Ramp thresholds are often used to allow safe movement (most often via wheelchair access) between offset floor conditions. These shapes are designed to meet the requirements for accessibility.
About Threshold Assemblies - Flush Applications
- Ramp assemblies comprise interlocking components, eliminating the need to weld joints. These assemblies can be configured to accommodate changes in floor conditions from 13mm to 57mm.
- Assemblies accommodate 13mm to 57mm floor offsets in meeting the 1:12 slope requirements of the ADA in North America and the Equality Act 2010 in the United Kindom. Higher offsets can be accommodated by using the risers, RAMP13_ and RAMP14_. See Approved Document M - Access to & Use of Buildings 2004, incorporating Revisions 2010 & 2013.
- We recommend our specially designed Mitre Returns.
- MR in a product number denotes that one pair (or set) of mitre returns (and mitre return extenders, if applicable) are included. Otherwise, we recommend filling and feathering the threshold ends with grout. Do not leave threshold ends open. - Mitre Returns are available for offsets up to 57mm.
- Assemblies are supplied with #10 stainless steel wood screws. Stainless steel machine screws and expansion shields are available at an extra cost. Assemblies allow for custom fabrication (i.e. notching, side access extensions, etc.); please consult Relcross.
- Assemblies are provided NET length.
13mm Floor Offset
R.5F_ & R.5FMR_ **
AVAILABLE FINISHES: A, AK
19mm Floor Offset
R.75F & R.75FMR_ **
AVAILABLE FINISHES: A, AK
25.4mm Floor Offset
R1F_ & R1FMR_ **
AVAILABLE FINISHES: A, AK
31.75mm Floor Offset
R1.25F_ & R1.25FMR_ **
AVAILABLE FINISHES: A, AK
38.1mm Floor Offset
R1.5F_ & R1.5FMR_ **
AVAILABLE FINISHES: A, AK
44mm Floor Offset
R1.75F_ & R1.75FMR_ **
AVAILABLE FINISHES: A, AK
50.8mm Floor Offset
R2F_ & R2FMR_ **
AVAILABLE FINISHES: A, AK
57.15mm Floor Offset
R2.25F & R2.25FMR_ **
AVAILABLE FINISHES: A, AK
**Mitre Returns are not ADA or Equality Act 2010 Compliant (i.e. that part of the ramp assembly only).
Pemkote™ Non-Slip Coating
Pemkote™ is highly recommended for all threshold assemblies, especially exterior conditions where moisture may be present.
Finishes
A (Mill Finish Aluminum) AK (Mill Finish Aluminum with Pemkote™ Non-Slip Coating)
