4000T Series Door Closer - Heavy Duty Wall/Gate Mounting
4000T Series Door Closer - Heavy Duty Wall/Gate Mounting
The 4000T is a heavy duty closer which was designed (for the North American market) primariily to control fire and smoke barrier doors (with maximum swing of 90°) normally held open with wall magnets. The UK version is supplied with a 'T' bracket (as shown) for fixing to gate posts where relaible control is desired and where no transom bar exists. Order this item separately if required.
NB - there is no UK fire certification on this product .
Features and Benefits
- Cast Iron
- Forged Steel Arm
- Double Heat Treated Steel Pinion
- All Weather Fluid
- 4000T Series closer is shipped with standard arm, standard track, track roller, standard plastic cover, and screw pack.
- Sized cylinders for doors to 1220mm
- Closer mounts on a 'T' bracket, hinge side, on either right or left hand door.
- 'T' bracket is designed for welding to steel gate post
- Standard or optional custom powder coat finish.
- Optional plated finish on metal cover, arm and fasteners.
- Optional SRI primer for installations in corrosive conditions is available with powder coat only.
Specifications
- Sized cylinders 4003T for doors/gates to 965mm
- Sized cylinders 4004T for doors/gates to 1220mm
- Maximum Opening - Templating allows 90° only
- Hold open point 90° - Possible with a wall magnet.
Mounting Options & Arms
Cylinder - 4000T-3071
Standard, non-handed cast iron cylinder assembly.
Cover - 4000T-72
Standard, non-handed plastic cover.
Metal Cover - 4000T-72MC
Optional, handed cover. Required for plated and custom powder coat finishes.
Standard Arm - 4000T-3077T
Non-handed arm.
Standard Track - 4000T-3038
Standard, non hold-open, non-handed track. Will not accept hold-open clip or bumper assembly.
Track Roller - 4000T-3034
Quiet, low friction roller assembly. Shoulder Dimension "X"= 1/8? (3 mm).
Special Custom Templating
Variants of the 4000T are used to address situations where conventional door closer applications are unsuitable - Particularly where hardware cannot be mounted above the door due to a flush ceiling or on arched or curved head doors where a square head frame does not exist.
In all situations where a wall is not available at 90° specify the 4000T bracket.
This can be screw fixed or welded to a metal frame as necessary. Important note - for external applications, a liberal coating of grease must be applied to the closer mechanism upon installation and periodically thereafter.
How to Specify or Order
4003T Heavy Duty Closer Wall/Gate Mounting
4004T Heavy Duty Closer Wall/Gate Mounting
4000T T Bracket (Order Separately)
Finishes
US28 - Powder Coated Silver
US28/SRI - Powder Coated Silver w. Special Rust Inhibiting Base Primer Coat